CFX PARAMETERS

Brings some color variance to FoC. Applies also to blaster in HB led mode (ledstrip blasters bolts have their own specific color parameters in ledstrip mode)

color profile transition time. Must be lower than the color.wav sound duration

defines the fx color map (legacy vs. heat mapping)

: defines the spatial flicker mixing depth with flicker color

define what % of the instability will affect the blade color (dim). A high value will �dig� more in the blade color and will create darker spots.

define what % of the instability will bring up the FoC color where the instability is. High value will produce bright FoC colored spots.

Bolt impact color randomization (in %). Provides some variance on the bolt color from impact to impact. Affect separately each RGB component in order to really alter the hue and not just brightness.

Control over the blade power in %. Allows for reducing the power bill without touching the colors themselves

this bit-field defines some masking to apply to some color profiles. This feature is beta and cannot be edited yet via RICE. Putting a zero in the field removes the color profile from the browsing (using spectrum or browsing). This provides an effective way to keep a large number of color profiles defined on the SD card while restricting it selection for a specific font.

defines a specific color profile to start with when this specific font is selected. Overrides the last used profile saved in prefs.txt. -1 disables the feature and let the stored value from prefs.txt be used at boot time.

Spectrum (color profile selection) mode. P = navigating color profile. B = navigating blade profile. AA = Aux. + Act || AT = Aux + Twist

Spectrum (color profile selection) axis. 0 is pitch (up/down), 1 is roll (throttle).

defines which channels {#1;#4} are used to control ledstrip power or leave them mirror the blade color. <br><br>Since version 10.002 of the firmware, the general configuration uses parameter strippower (bitfield) to control which of the L- driver outputs are used for powering the ledstrip and which are still mirroring the blade color channels. For instance: strippower=1110 will configure channels #1, #2 and #3 as strip (negative) power control while channel #4 remains free for mirroring the color channel. This comes quite handy when it�s used to drive a rumbling motor or a spinning crystal chamber. <br><b>See Ledstrip blade specifics section in the manual</b>

Master control over the blade power in %. Allows for reducing the power bill without touching the colors themselves

Base delay in ms followed by a % of randomness. 5000,10 <=> {4500 ; 5500} ms. <br>A new random color profile is selected at each ignition. Every 10 ignition a random blade profile is selected.<br>Example setting: 5000,10

Base delay in ms followed by a % of randomness. 5000,10 <=> {4500 ; 5500} ms. <br>A new random color profile is selected at each ignition. Every 10 ignition a random blade profile is selected.<br>Example setting: 8000,5

Base delay in ms followed by a % of randomness. 5000,10 <=> {4500 ; 5500} ms. <br>A new random color profile is selected at each ignition. Every 10 ignition a random blade profile is selected.<br>Example setting: 120000

Base delay in ms followed by a % of randomness. 5000,10 <=> {4500 ; 5500} ms. <br>A new random color profile is selected at each ignition. Every 10 ignition a random blade profile is selected.<br>Example setting: 360000,30

"specifies the PLI color either with the 4 channel list or the color dictionary.<br>Example: bladeplicolor=Crimson)

Blade color

Flash on Clash color

Lockup color

Blaster bolt color

The dedicated xcolor part of the color profile defines the crystal chamber color (see the accent sequencer section) profile. Crystal chamber drive values are expressed between 0 and 1023 like the other colors.

Flash on Clash mixing configuration. Color profiles also embed a �per color profile� FoC Mixing parameter with mcolor. This ensures to get the best / adapted Flash on Clash mixing strategy for any color defined by the profile. Refer to the dedicated Flash on Clash mixing paragraph.

Fx color.

Flicker color.

Stab color.

Drag color.

A nice name for the colorprofile